Car base Jenama kereta What Kind Of Oil Does Bmw 528I Take?

What Kind Of Oil Does Bmw 528I Take?

5W-30 Pento High Performance is a fully synthetic high performance engine oil, developed for the most recent vehicles with extended oil service intervals.
View full answer

What engine oil does the BMW 528i use?

Mobil 1 – Extended Performance High Mileage 5W-20 Full Synthetic Motor Oil, 5 Quart (Part No.15020)
View full answer

What type of oil does a 2014 BMW 528i take?

Valvoline – European Vehicle SAE 5W-40 Full Synthetic Motor Oil, 5 Quart (Part No.881166)
View full answer

What kind of oil does a BMW Series 5 take?

The best engine oil for BMW 5 Series is 5W30 synthetic grade oil, however we recommend you to stick with mineral engine oil for the initial 10,000kms.
View full answer

Can I use 5W-30 oil in a BMW?

The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines.
View full answer

Should I use 5W or 0W oil?

0W Motor Oil and Viscosity FAQs Learn about 0W motor oil and viscosity by reviewing these common questions that consumers have regarding both topics.0W motor oils are the latest viscosity within the motor oil category and are formulated to meet the demands of today’s modern engines.

  • Title: Facts About 0W Motor Oils
  • Duration: 1:35 minutes
  • Description:
  • Facts about Pennzoil Platinum 0W motor oils.

Pennzoil Platinum® Full Synthetic 0W-20 motor oils offer the same or better protections as 5W-20 motor oils. Pennzoil is made from natural, gas providing the optimal properties for a 0W grade oil.

  1. Facts about 0W motor oils Transcript
  2. 00:00.00
  3. Inspiring, mid-tempo music
  4. 00:02.00
  5. Pennzoil Logo
  • Facts about 0W motor oils
  • 00:06.07
  • What is 0W?
  • Yellow oil bottle.
  • 00:09.62
  • 0W-20 | All multi-weight motor oils are given 2 important numbers.
  • 00:19.88
  • 0W-20
  • Snowflakes.
  • W – WINTER
  • 0 – tells you how the oil will flow in colder temperatures.
  • The lower the number, the faster the oil will flow to critical engine parts at startup in the cold.
  • 00:26.62
  • 0W-20
  • Thermometer.
  • 20 – tells you how the oil will flow at higher temperatures, once the engine is warmed up and running.
  • It’s also an important number to pay attention to when choosing what kind of oil to put in your vehicle.
  • 00:38.34

? – Could a vehicle that has used 5W-20 in the past now use a 0W-20? YES! Please refer to your vehicle/equipment handbook to confirm the suitability of any product recommendations before use.

  1. 00:43.44
  2. Yellow oil bottle.
  3. In fact, Pennzoil Platinum® Full Synthetic 0W-20 motor oils offer the same or better protection as 5W-20 motor oils.
  4. 00:52.41
  5. Natural gas droplet.

Pennzoil is made from natural gas, providing the optimal properties for a 0W grade oil. The base oil is crystal clear. We add our unique high-performance additives which gives Pennzoil its distinctive amber color. Why choose Pennzoil 0W? W0W

  • 00:56.90
  • Car with exhaust cloud.
  • #1 – Save fuel and reduce your CO2 footprint
  • 01:04.14
  • Tree.
  • W0W – With Pennzoil Platinum® 0W engine oils, you can save up to 2% in fuel* and reduce your CO2 footprint**
  • *Based on Sequence VI fuel economy test using SAE 0W-20 vs. reference fuel
  • **Based on CO2 equivalent avoided per 1l fuel saved, not combusted in the engine
  • 01:10.25
  • Snowflakes.
  • #2 – Perform better in colder temperatures
  • 01:14.12
  • Snowflakes.
  • W0W – Pennzoil Platinum® 0W flows 3x faster under extreme cold temperatures to reach and protect critical engine parts*
  • *Compared with API SN specifications and based on ASTM D4684
  • 01:19.35
  • Turbochargers.
  • #3 – Get outstanding turbocharger protection
  • 01:23.15
  • Turbochargers.
  • W0W – Pennzoil Platinum protects engine parts that can reach temperatures up to 1,000°C
  • *Protects engine parts that can reach temperatures up to 1,000°C
  • 01:28.29
  • Finish Line Flags.
  • See how far you can go with Pennzoil Platinum® 0W motor oils
  • 01:32.24
  • Yellow oil bottle.
  • The Proof Is In The Pennzoil
  • Learn More
  • The first number of a multi-grade oil designates the ability for the oil to be pumped and flow at colder temperatures; the “W” stands for winter. Thus, a 0W oil will be able to flow faster and get to critical engine components better than a 5W or a 10W oil; especially in extreme cold conditions and at engine start-up. The second number is the viscosity measurement value at engine operating conditions. This viscosity number is crucial for proper lubrication and protection of your engine.
  • When motor oil was first introduced, it was sold only in monograde varieties, such as SAE-X. Multi-weight engine oils were first introduced in the 1950’s to address the issues of varying temperatures and engine operating conditions. The first number of a multi-grade oil designates the ability for the oil to be pumped and flow at colder temperatures; the “W” stands for winter. Thus, a 0W oil will be able to flow faster and get to critical engine components better than a 5W or a 10W oil; especially in extreme cold conditions and at engine start-up The second number is the viscosity measurement value at engine operating conditions. This viscosity number is crucial for proper lubrication and protection of your engine. Thus, a vehicle that recommends using a SAE 5W-20 can use a multi-grade oil SAE 0W-20; especially in colder climate regions. Using a lower “winter” weight can help with faster oil delivery, quicker engine warm up to operating conditions and give fuel economy benefits compared to a 5W or 10W motor oil.
  • 0W motor oil was developed to operate in today’s modern vehicle engines, which are smaller and run hotter than older engines. In order to make a 0W motor oil, synthetic base stock is typically required to meet industry and OEM specifications and therefore is available only as a synthetic motor oil. The benefits of using the correct 0W grade motor oil for your vehicle are faster flow at start-up to reach critical engine parts, faster engine warm up and delivers better fuel economy as compared to higher viscosity grade oils.
  • was designed to deliver base oils with performance suited to blend 0W viscosity grades and deliver benefits of low viscosity motor oil, low oil volatility and extreme temperatures performance. Low viscosity realizes the fuel economy benefits inherent within the 0W grade oils whereas low oil volatility and temperature performance are necessary in controlling oil consumption over the oil drain and maintaining long term engine protection.
  • Yes, our SAE 0W-20, 0W-30 are suitable for use with all current vehicles on the road today calling for or older specifications. Remember, the second number in the SAE grade (20 or 30) is the critical viscosity required by your engine. Thus, our 0W will give you faster delivery of oils to critical engine parts at start-up and quicker engine warm up to operating temperatures. The only exception is SAE 0W-16 motor oils.0W-16 grade oils are specifically designed for engines requiring this viscosity grade and is not suitable for SAE 5W-20 or thicker oil grades.
  • Within the past decade, original equipment manufacturers (OEMs) have been tasked to meet the legislated regulations for better fuel economy and lowered emissions OEMs have made huge strides by reducing engine size and maintain horsepower performance through the introduction of smaller Turbocharged Gasoline Direct Injection engines (TGDI) and operating on thinner viscosity grades. The push for SAE 0W-20 and SAE 0W-16 motor oils grades has helped OEMs achieve some of those fuel economy and emission targets. SAE 0W-16 and SAE 0W-20 meet and exceed the need of these engine oil specifications. It is designed to meet these fuel economy benefits while offering outstanding performance and protection throughout the oil drain interval.
  • The benefits of using the correct 0W grade oil for your vehicle are faster flow at start-up to reach critical engine parts, faster engine warm up and delivers better fuel economy as compared to higher viscosity grade oils.
  • No, if your owner’s manual calls for a thicker oil, you should not use a thinner SAE grade nor use a thicker oil for a recommended thinner oil vis-grade. Using the proper viscosity motor oil will help protect and maintain the performance of your vehicle’s engine. Thus, always refer to the manufacturer’s recommendation while your vehicle is under warranty. **if you have a car that recommends 0W-20, do not use 5W-30 – back # of vis-grade must match or it is a no-go.
  • 0W motor oils (0W-20) are suitable for use in 5W applications because the 20 refer to the viscosity measurement value. That value is the one most critical aspect to match when selecting a motor oil. The 0W or 5W refers to the pumpability in cold temperatures. Therefore, a 0W would flow more easily than a 5W and could be an acceptable substitute. Thus, it is suitable to use a SAE 0W-20 as a replacement for SAE 5W-20 application. **Offers same protection as 5W but also provides faster flow and better fuel economy.
  • You should consult your manufacturer’s owner manual to ensure you use the recommended vis-grade to maintain performance of your vehicle’s engine. However, offer the same protection as SAE 5W and gives you additional benefits of faster flow at start-up, enables faster engine warm up and delivers better fuel economy. For example, if your car calls for SAE 5W-20 motor oil you can use SAE 0W-20 motor oil because the second number (20) is the most crucial number and your engine is designed to take into account the viscosity of the motor oil at engine operating conditions.
  • Leaks are not typically caused by the motor oil. If your engine is experiencing oil leaks, it is likely due to engine wear and cracked or worn seals on older vehicles. To circumvent this issue, Pennzoil offers motor oils in 0W grades which not only deliver unbeatable engine but are also boosted with seal swelling agents that are designed to rejuvenate cracked or worn seals to help reduce oil leaks.
  • No. Top-off is required when your dipstick indicates incorrect oil level. made from natural gas have outstanding volatility control which helps reduce oil consumption and maintain correct oil level.
  • In order to make a 0W motor oil, it typically requires a synthetic base stock to meet industry and OEM specifications. Therefore, are usually not offered in a SAE 0W-XX motor oil.
  • First always consult the manufacturer’s owner manual to confirm the recommended vis-grade to maintain performance of the vehicle’s engine while the vehicle is under warranty. After the warranty period, a car that calls for SAE 5W-20 engine oil can use SAE 0W-20 motor oil because the second number (20) is the most crucial number for suitability. Pennzoil’s 0W synthetic motor oils offer the same protection as SAE 5W and gives the additional benefits of faster flow at start-up, enables faster engine warm up and delivers better fuel economy.
You might be interested:  What Is A Mercedes B1 Service?

In the natural gas drop depicted in the header image, the base oil is crystal clear. We add our unique high-performance additives which gives Pennzoil its distinctive amber color. : 0W Motor Oil and Viscosity FAQs
View full answer

Is 5W or 0W better?

D. Fuel Economy – Both 0W-20 oil and 5W-20 oil perform more or less the same in terms of their mileage and fuel economy.0W-20 oil may give you slightly better fuel efficiency and fewer carbon emissions due to its thinner oil flow and low viscosity. But it also depends on whether you’re using a conventional, synthetic blend, or fully synthetic motor oil,
View full answer

Is 5W 30 or 5W 40 better?

The differences between 5w30 and 5w40 oils – For 5w30 oil:

Kinematic viscosity is between 9.3-12.5mm²/s Dynamic viscosity is 2.9mPas.

For 5w40 oil:

Kinematic viscosity is between 12.5-16.3mm²/s Dynamic viscosity is 3.5mPas.

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.5w40 and 5w30 motor oils have winter viscosity grades of five, meaning they are effective down to temperatures of -30°C, and are more viscous at very low temperatures, compared to, say, 10w40 oils.

Resultantly, 5w40 oils are likely to be used in higher-performance engines that have higher operating temperatures and loads than the norm – those driven in urban environments, that commonly sit in traffic or driven at particularly high speeds, for example. If your vehicle is not designed to be driven in a high-performance manner, or you drive at a more considered, environmentally friendly pace, 5w30 oils are a good choice.

These are commonly better for certain engine components such as oil pumps, can clean the engine better, and have longer lifespans due to having a lower temperature range.
View full answer

Should I use 5W 20 or 5W 30?

5W20 Vs 5W30: Which Oil Is Better? – Neither of the two oils is any better or worse than each other. It all depends on your engine requirements and car type. When choosing the right multigrade engine oil for your car, you should consider two factors:

The temperature at which you regularly drive your car (whether you drive in colder temperature or hotter climates)Your engine’s recommended oil viscosity grade

Although some cars do allow some flexibility in engine oil options, most have a recommended viscosity grade. This is because the engines are tuned to run on a certain oil viscosity, and changing that could affect your engine’s performance. Ideally, 5W 30 oil is perfect for people who drive in seasonal or hotter climates.

It has a better viscosity index than 5W-20 oil and is more versatile in terms of its warmer temperature range. You’ll get better protection with 5W 30 oil in cold as well as hotter climates.5W-20 oil is best for those who live in colder climates with low temperatures. It can be used for light-duty applications, for engines that do not reach very extreme temperatures.5W-20 oil provides excellent start-up performance in colder temperatures.

Note : Older vehicles may need a high mileage variant of their regular oil (5W-20 or 5W-30). In this case, the high mileage oil better protects the engine at extreme temperatures from friction and engine drag. Keeping this in mind, here’s what you need to know about 5W-20 vs 5W-30 oil.
View full answer

Does my BMW need full synthetic oil?

What Kind Of Oil Does Bmw 528I Take With motor oil being the most important fluid next to gasoline in your BMW vehicle, it’s important that you don’t scrimp on the quality or type of motor oil you put in your BMW. That’s why BMW recommends the exclusive use of synthetic motor oils inside all BMW engines.

Powered by such high-tech powerplants, a corner has been turned that dictates the use of stronger, longer-lasting fluids and lubricants than ever before. It used to be that conventional motor oil was the fluid of choice to lubricate your vehicles. It was cost-effective enough to change it every 3,000 miles in an effort to keep it fresh, and running at its peak performance.

Through the years, each new generation of motor vehicle, whether a car, truck or SUV, has come with a new set of rules as to how many miles you were able to drive between oil and filter replacements. There is so much chatter out there with internet, print, or even the opinions of friends at every turn that it’s no wonder there is so much confusion.

  1. That’s why the service advisors at BMW of Wyoming Valley recommend following the advice found in your BMW Owner’s Manual for the latest information on your vehicle’s needs.
  2. Read on as we break the two predominant types of motor oil down for you.
  3. Conventional motor oil: A sure bet that you can’t go wrong with.

You’ll just do it more often. With its tried and true nature, we know traditional motor oil will function in almost any situation as long as you remember to change it sooner as a result of its shorter, more frequent, service interval. The same with its oil filters. What Kind Of Oil Does Bmw 528I Take Synthetic motor oil: The superior choice for today’s modern high-tech engines, but easy enough to use in other engines as well. Synthetic Motor Oil has the added benefit of being suited for use in most other engines as well. Synthetic oils offer added protection against foreign deposits, and provide intensely long-lasting performance in terms of viscosity (the ability to flow through engine parts).

  1. As a result it’s the perfect motor oil grade to be used in your high-technology BMW TwinPower Turbocharged engines.
  2. Living in the W-B, we see our fair share of hot and humid weather that stretches into bouts of extreme cold during winter.
  3. We all know how cold temperatures can gum up the works in your BMW 2-, 3-, 4, 5- 6- series vehicles or in your BMW X1, X2, X3, X4, X5, and X6 cars or SUV’s crankcase, while six months later, the high heat and humidity can do a number on your batteries and other components, not to mention the viscosity of your conventional motor oil.
You might be interested:  How Many Miles Can A Ford Fusion Last?

That’s why BMW recommends exclusively the use of synthetic motor oils that don’t deteriorate from cold or heat, nor become compromised by a phenomenon known as thermal breakdown. Don’t scrimp when it comes to an oil filter, either. You’ll need one that will last the same time as your new high-tech synthetic.

Our BMW of Wyoming Valley parts department will have everything you need. Your new Wyoming Valley car or SUV utilizes new technology in the form of the BMW Condition Based Service (CBS) system. Using sensors and algorithms, the system monitors everything from engine revolutions to torque loads, and other measurements to give an accurate reading as to the remaining lifespan on your vehicle’s coolant, motor oil, remaining brake pad material and more.

No one is better equipped to service your BMW vehicle better than the factory-certified technicians at BMW of Wyoming Valley. With our vast experience repairing and maintaining these gorgeous Ultimate Driving Machines you could refer to us as “the BMW whisperers.” By checking with them, they can advise you on the latest technologies as well as the lubricants that will best suit your style of driving. What Kind Of Oil Does Bmw 528I Take BMW of Wyoming Valley Parts and Service department will have the correct type of synthetic oil in stock that will suit the needs of your specific BMW vehicle and its usage. If your M5 spends a lot of time on the highway, or your X4 M40i has a habit of running off and playing in the dirt, sand and mud, your Wyoming Valley service mechanics can subject the proper lubricants for your BMW vehicle.
View full answer

Does BMW need specific oil?

Do BMW Group vehicles require special oil? – BMW Group vehicles require engine oils that meet the specifications developed by BMW, which vary depending on the make, model, and year of the vehicle. All BMW Group engine oils meet BMW Group specifications for all Group engines. Consult your owner’s manual for the engine oil specification required. What Kind Of Oil Does Bmw 528I Take : BP AWARDED BMW GENUINE OIL CONTRACT IN 2021 | WELCOME | CASTROL USA
View full answer

What brand of oil does BMW recommend?

Oil for most BMW passenger vehicles and SAVs: –

BMW TwinPower Turbo Engine Oils – Oils designed for BMW vehicles by BMW. Mobil 1 SAE 0W-40 Valvoline SynPower SAE 5W-30 Castrol Syntec European Formula SAE 0W-30 Beginning in 2015, BMW is recommending Shell/Pennzoil PurePlus Oils as their aftermarket oil.

View full answer

Can I use 5W-30 instead of 0W 40?

1. Can I Mix 0W-40 With 5W-30 Engine Oil? – Yes, if your car manufacturer approves it. If not, you should only use the approved oil.0W-40 and 5W-30 oils can be combined because 5W-30 is thicker oil than 0W-40, and the extra, lower viscosity will make the start-up oil flow easy and efficient.

Temperature also plays a vital role in deciding if you can mix them. Both the oils are winter oils, so they’ll work well in cold temp regions like Europe. However, the 0W-40 alone will perform better due to its ability to stay thin down to a low temperature of -40℃. Note : Mix only the different oil grades and never the oil brands.

And it’s best to use only recommended oil in your owner’s manual to ensure your rod bearings and timing gears are correctly lubricated.
View full answer

What happens if you put the wrong engine oil in a BMW?

Conclusion – Finally, you should only select the oil viscosity that is strongly advised for your engine and driving conditions. To find out which oil your car needs, click here, The wrong engine oil can decrease your vehicle’s performance and cause engine damage.
View full answer

What happens if I use 0W 30 instead of 5W-30?

Can I Add 5w-30 To 0w-30? Is it possible? Yes, Viscocity oils flow slower than viscosity oils, so 5W30 will flow faster than 10W30 and 0W30 will flow faster than 5W30. Is 5W-30 the same as 0W-30? The 0W-30 engine oil is a lower viscosity than a 5W-30 meaning it is thinner,

As the 0W-30 is a lower viscosity, its resistance to flow is lower. The lower viscosity grade flows through the engine faster and helps the parts perform their roles more efficiently as they reduce friction. Can I mix 0W and 5W oil? As mentioned, you can mix the (w) portion, The 0w or 5w is the winter rating of the oil which shows how well it will hold its viscosity in colder climates.

The other number is the weight of the oil and can’t be mixed. What oil Can you mix with 5W-30? These two motor oils are very similar in viscosity; hence, they might mix perfectly in your engine. Therefore, you can mix 5W30 with 10W30 with no ill effects whatsoever.
View full answer

Why did BMW switch to 0w30?

If you haven’t performed an oil change on your BMW in a while, you might be in for a surprise the next time you do with BMW’s switch from 5W-30 to 0W-30. Here at FCP Euro, we love LIQUI MOLY products. If you haven’t been converted quite yet, it’s time you give them a try, What Kind Of Oil Does Bmw 528I Take Gareth, our BMW Catalog Manager, explains the switch from 5w-30 (LL-01) to 0w-30 (LL-01FE) oil. The new 0w-30 “FE” product should better protect your engine on cold starts and offer increased fuel economy. If you’re unfamiliar with engine oil designations, the first number “0w” defines how well the oil flows (viscosity) when cold.

The second number defines the viscosity when the engine is up to operating temperature (210°F). Flowing more freely when cold allows the oil to reach the internal surfaces of the engine sooner, which lubricates and protects those internals more quickly. This also allows the engine to operate more efficiently (with less friction) while the engine comes up to temperature.

During the lifetime of your car, this can increase your overall fuel efficiency. BMW changed their oil viscosity requirements for many of the newer turbocharged engines back in 2016, but as of late 2018, most of the 5w-30 LL-01 and LL-04 bulk stock has been depleted.

Moving forward, only the new LL-01FE and LL-12FE oil specs will be available in Genuine BMW Twin Power Turbo engine oil. For most everyone, this change by BMW won’t have any real effect on what you need to do. The only change you will notice is that your new oil bottles have the new part number and new designation.

Since you’re probably about to perform an oil change, check out Nate’s helpful instructions on how to properly pour your oil without any spillage. If you like this Really Quick Product Review, subscribe and check back here for regular releases in the future. What Kind Of Oil Does Bmw 528I Take
View full answer

What happens if I use 5W instead of 0W?

5W-30 is a thicker oil that flows more slowly than 0W-20. A quick explanation of these numbers is needed. The first number with the ‘W’ is the ‘Winter’ value and represents the lowest temperature at which the oil will flow. A lower number means it will still flow at a lower temperature.
View full answer

What cars use 0W oil?

0W-40 oils are recommended by automakers for many types of European vehicles, including Mercedes-Benz, Porsche and Volkswagen. The viscosity is gaining popularity with American automakers for high performance engines in both cars and pickup trucks. In this viscosity, we offer Mobil 1™ FS 0W-40 or Mobil 1™ ESP Formula 0W-40.

  • They can be used in either gasoline- or diesel-powered engines.
  • If your diesel-powered engine requires an oil meeting the CK-4 specification, then choose Mobil Delvac 1™ ESP 0W-40.
  • Note: We don’t compare diesel engine oils with motor oils formulated for gasoline-powered vehicles.
  • Mobil 1 ESP Formula 0W-40 carries the dexos®2 approval specified for General Motors vehicles.

*The dexos® specification and trademark are exclusive to General Motors, LLC. What do the numbers in 0W-40 mean? The numbers refer to the weight and thickness, or viscosity, of the oil. Motor oil gets thicker when it’s cold and thinner when it heats up.
View full answer

You might be interested:  How To Set Up Audi Connect?

Is 0W or 5W better in winter?

The W Means Winter – Motor oil is measured by its viscosity —basically how thick or thin it is. The higher the viscosity, the slower it flows. All motor oils are given a ratings grade by the Society for Automotive Engineers. An example is 5W30—the “W” stands for winter and the oil’s cold weather rating.
View full answer

What does 0W mean in engine oil?

0W-20 – What Does it Mean? – Looking at the number 0W-20 (and motor oil grades in general) can be confusing. Why is there a zero in the grade? Does that mean I have less protection? To get a better understanding, let’s discuss the motor oil grading system.

Motor oil grades are defined from an industry specification known as SAE J300 (SAE = Society of Automotive Engineers). Oil flows differently at lower temperatures than higher temperatures. Picture starting a car on a cold winter morning versus driving on a desert highway in the summer. The flow of oil in the engine is very different in those two situations.

The flow and its resistance to movement of a fluid is known as the viscosity of the fluid and is very important in motor oil. Motor oil viscosity is commonly measured at lower and higher temperatures. The properties of the oil at lower temperatures define the first part of the motor oil grade.

  • In the example of a 0W-20, the “0W” part of the grade is related to the measurement of viscosity at low temperatures as defined by SAE J300 (and the “W” stands for Winter – relating it to low temperature performance).
  • The better the oil performs at lower temperatures, the lower the number before the W.

The numbers are ranges defined by SAE J300, so zero doesn’t mean zero performance; it means the oil performs better at lower temperatures and flows easier than oils that fall in 5W, 10W, 20W, etc. ranges. The “20” portion of the 0W-20 grade relates to how the oil flows through the engine at higher temperatures – like when your engine gets up to normal operating temperatures.
View full answer

Does 0W20 oil burn faster?

“Normal” Oil Burning in One Vehicle May Be Excessive in Another – While oil burning is a relatively common problem, manufacturers don’t provide uniform guidance on this issue, so what might be normal for one engine could be excessive for another. For example, BMW tells owners it’s normal for some of its engines to burn a quart of oil in fewer than a thousand miles.

In a tip sheet to fleet-vehicle operators, GM says normal consumption “can be in the range of one quart within 2,000 miles on a properly driven and maintained vehicle.” Other manufacturers say nothing in their owner’s manuals about oil consumption — and if you ask what’s “normal,” the answer you get may depend on whom you talk to.

As a rule, most engines with fewer than 50,000 miles shouldn’t use much more than a quart of oil between oil changes (unless the manufacturer says differently). If an engine requires a quart every, say, 3,000 miles or less, that could be a sign of a leak (which may not be easily visible) or of internal engine problems, such as worn valve guides, piston rings or any of a number of different types of seals.
View full answer

Is 5W 30 or 5W-40 better?

The differences between 5w30 and 5w40 oils – For 5w30 oil:

Kinematic viscosity is between 9.3-12.5mm²/s Dynamic viscosity is 2.9mPas.

For 5w40 oil:

Kinematic viscosity is between 12.5-16.3mm²/s Dynamic viscosity is 3.5mPas.

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.5w40 and 5w30 motor oils have winter viscosity grades of five, meaning they are effective down to temperatures of -30°C, and are more viscous at very low temperatures, compared to, say, 10w40 oils.

Resultantly, 5w40 oils are likely to be used in higher-performance engines that have higher operating temperatures and loads than the norm – those driven in urban environments, that commonly sit in traffic or driven at particularly high speeds, for example. If your vehicle is not designed to be driven in a high-performance manner, or you drive at a more considered, environmentally friendly pace, 5w30 oils are a good choice.

These are commonly better for certain engine components such as oil pumps, can clean the engine better, and have longer lifespans due to having a lower temperature range.
View full answer

Should I go with 5w30 or 5w40?

3 main tips for choosing. If you use your vehicle in urban conditions, often sit in traffic jams, drive at high speeds, and your car is old, buy oil with the 5w40 viscosity. But if you prefer calm driving, and fuel economy and eco-friendliness are important for you – choose a product with 5w30 marking.
View full answer

Is 5W-40 oil OK for BMW?

All products blended from virgin base oils – Fully Synthetic 5w40 Engine Oil Premium Synthetic oil for use in Diesel & Petrol Engines where specified.5w/40 is a fully synthetic high end engine oil for passenger cars designed to meet the thorough demands of many current petrol and diesel car engines.

High Performance Engine Oil Volkswagen, Audi, Seat and Skoda diesel cars and light vans fitted with a Pumpe Düse (PD) engine – specification VW 505.01 Suitable for UK Low and High Temperatures Suitable for long service intervals Supreme levels of engine protection The additives within our oil ensures optimum long life performance of your engine.

This oil can be used within many Volkswagen, Audi, Seat, BMW, Skoda & Renault engines, if you are unsure if this product is for your car then please get in touch with your registration and we will be happy to help. This item is sent out via DPD on a Next Working Day service.

  • Unfortunately we can’t send it to the following Postcodes due to high Zone charges imposed by DPD: AB30-56, BT, FK17-99, G83, IV1-39, IV52-5, IV63, KW1-17, PA20-78, PH15-50, HS1-9, IV40-56, KA27 & KA28, ZE1-3 Any orders placed to be delivered to the above postcodes will be cancelled unfortunately.
  • Thank you for your understanding.

Product Benefits: Improved performance and fuel efficiency Long service intervals Low temperature performance Supreme levels of engine protection Ensures high lubrication performance over longer drain periods Ensures a greater fuel efficiency Aids high levels of engine cleanliness Performs well to High and Low temperatures here in the UK Helps to minimise engine wear and reduce oxidation Product Specifications: VW: 502.00 / 505.01 ACEA: C3-10 API: SN/CF BMW: LL-04 Ford: WSS-M2C 917A GM Dexos 2 MB: 229.31 229.51 Renault: RN0700, RN0710 Fiat: 9.55535-S2
View full answer

What brand of oil does BMW recommend?

BP AWARDED BMW GENUINE OIL CONTRACT IN 2021 | WELCOME | CASTROL USA bp (February 15th, 2021), a world leading supplier of high-performance lubricants, and the manufacturer of the Castrol Oil Brands, is proud to announce it has been selected as the engine oil partner for BMW and MINI authorized dealers across the US, Canada, and Mexico.

  1. This new five-year agreement re-establishes a long-standing partnership between these two premium brands as Castrol had been the engine oil supplier over a 14-year span.
  2. As part of the recent program, bp will continue to produce BMW Group’s branded engine oils which meet the OEM’s most recent and rigorous engine specifications including LL-17 FE+ and LL-12 FE as well as older generation specifications such as LL-01 and LL-04.

The BMW branded lubricant formulations are based on Castrol EDGE, a leading full synthetic brand strengthened by Fluid Titanium Technology which increases film strength, reduces friction, and improves lubrication under the intense pressure of high output engines.

  1. We are honoured to have been selected by the BMW Group to resume our position as their lubricant supplier.
  2. The BMW brand is both iconic and globally recognized as a symbol of performance engineering, which is well aligned with bp market position.
  3. We look forward to future collaboration in lubricant development as well as the pursuit of new sustainability initiatives,” said Laura Posadas Regional President, Castrol Americas.

Original BMW Group Engine Oil is a range of engine lubricants specifically formulated to meet the needs of BMW and MINI vehicles and branded Twin Turbo Power.
View full answer

Related Post