Car base Pembaikan kereta What Oil Does A Kia Picanto Take?

What Oil Does A Kia Picanto Take?

What Oil Does A Kia Picanto Take
5W-30 engine oils for Kia.
View full answer

What is the oil used in Kia Picanto?

CASTROL MAGNATEC STOP-START 5W-30 A5 best – Today even a normal driver can stop and start as many as 18,000 times a year. And all that idling in traffic or waiting at junctions causes microscopic wear in your engine. In the latest industry test, New Castrol MAGNATEC STOP-START 5W-30 A5 gives significantly less wear in STOP-START operation (as tested in the industry OM646LA test).
View full answer

What kind of oil does a 2013 Kia Picanto take?

To help achieve proper engine and powertrain performance and durability, use only recommended lubricants and oil for Kia Picanto with the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy. These lubricants and fluids are recommended for use in Kia Picanto. Best Engine oil for Kia Picanto

Lubricant Volume Classification
Engine oil *1 *2 (drain and refill) 1.0 T-GDI 3.6 l (3.8US qt.) API SN & ACEA C2
1.0 MPI /FFV/1.2 MPI 1.0 MPI/FFV : 3.0 l (3.17 US qt.) 1.2MPI : 3.5 l (3.7 US qt.) FOR INDIA, MIDDLE EAST, IRAN, LIBIA, ALGERIA, SUDAN, MOROCCO, TUNISIA, EGYPT API service SM, ILSAC GF4 or above, ACEA A5/B5
EXCEPT ABOVE COUNTRIES API SN, ACEA C2
Manual transaxle fluid 1.0 T-GDI 1.6~1.7 l (1.7 ~ 1.8 US qt.) API Service GL-4 SAE 70W – HK SYN MTF 70W – SPIRAX S6 GHME 70W MTF – GS MTF HD 70W
1.0MPI / 1.2 MPI 1.3~1.4 l (1.4 ~ 1.5 US qt.)
Automatic transaxle fluid 1.0 MPI 5.7 l ( 6.02 US qt.) ATF SP-III (Recommended DIAMOND, SK)
1.2 MPI 6.1 l ( 6.45 US qt.) ATF SP-III (Recommended DIAMOND, SK)
Coolant 1.0 T-GDI 5.4 l (5.70 US qt.) Mixture of antifreeze and water (Ethylene glycol base coolant for aluminum radiator)
1.0 MPI 5.0 l (5.28 US qt.)
1.2 MPI 5.5 l (5.81 US qt.)
Brake / clutch fluid 0.4 ~ 0.44 l (0.42 ~ 0.46 US qt.) FMVSS116 DOT-3 or DOT-4
Fuel 35 l (9.24 US gal.)
Fuel (FFV) Petrol reservoir 0.8 l (0.2 US gal.)
Aclohol 38 l (10.03 US gal.)

1: Refer to the recommended SAE viscosity numbers below. *2: Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction.

  • Often, these improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost and energy savings.
  • Recommended SAE viscosity number Caution: Always be sure to clean the area around any filler plug, drain plug, or dipstick before check- ing or draining any lubricant.

This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged. Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability).

Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage. When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change.

Proceed to select the recommended oil viscosity from the chart.
View full answer

Should I use 5w30 or 5w40?

Application –

5w30 can be used by different type of vehicles and in different range of temperatures, but is ideal for colder temperatures.5w40 is often used in higher mileage engine sand performs better in warmer temperatures.

  1. View full answer

    Can I use 5W 40 oil instead of 5w20?

    The oil cap calls for 5W40 synthetic oil. I would like to know if 5W20 synthetic can be used? My car has 38410 miles. My car has an automatic transmission. The quick answer is no you should not use 5w20 when 5w40 is recommended by manufacturer. The thinner oil may not lubricate the internal engine as designed. The turbo also needs synthetic oils to withstand the heat of the turbo. The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
    View full answer

    Can I use any 5w30 oil in my car?

    In short: Every manufacturer has its own engines with its own specifications. As a result, every engine needs its own specific 5W30 oil.
    View full answer

    Do Kias require synthetic oil?

    Notice to Our Loyal Service Customers Regarding Your Kia Warranty And Kia’s New Synthetic Oil Requirement – Kia is now requiring that all vehicles manufactured after April 2021 use full-synthetic oil to continue to be covered under factory warranty. After June of 2022, any vehicle that is still under factory warranty will need to use full-synthetic oil to continue to be covered under factory warranty.
    View full answer

    Do Kias take synthetic oil?

    Protect Your Kia with Full Synthetic Oil – Kia engines need high-quality, properly balanced lubricant to operate efficiently. Instead of using standard oils and filters, Kia uses Full Synthetic oil. This type of oil has no solids or particulates, so it’s much easier to clean and more efficient than other types.
    View full answer

    Do I need 5w20 or 5w30?

    5W20 Vs 5W30: Which Oil Is Better? – Neither of the two oils is any better or worse than each other. It all depends on your engine requirements and car type. When choosing the right multigrade engine oil for your car, you should consider two factors:

    The temperature at which you regularly drive your car (whether you drive in colder temperature or hotter climates)Your engine’s recommended oil viscosity grade

    Although some cars do allow some flexibility in engine oil options, most have a recommended viscosity grade. This is because the engines are tuned to run on a certain oil viscosity, and changing that could affect your engine’s performance. Ideally, 5W 30 oil is perfect for people who drive in seasonal or hotter climates.

    It has a better viscosity index than 5W-20 oil and is more versatile in terms of its warmer temperature range. You’ll get better protection with 5W 30 oil in cold as well as hotter climates.5W-20 oil is best for those who live in colder climates with low temperatures. It can be used for light-duty applications, for engines that do not reach very extreme temperatures.5W-20 oil provides excellent start-up performance in colder temperatures.

    Note : Older vehicles may need a high mileage variant of their regular oil (5W-20 or 5W-30). In this case, the high mileage oil better protects the engine at extreme temperatures from friction and engine drag. Keeping this in mind, here’s what you need to know about 5W-20 vs 5W-30 oil.
    View full answer

    Does it really matter what oil I put in my car?

    The most important thing is to use oil that’s the right thickness, or viscosity, for your car’s engine. Oil that’s too thick or thin won’t provide the necessary protection for your engine, which can result in costly damage.
    View full answer

    What is 5W-40 oil used for?

    The 5W-40 viscosity is a prevalent recommendation for performance engines in European vehicles with gas-powered engines, and in American diesel pickup trucks. We offer 5W-40 oils for gasoline- and diesel-powered engines. If you have a modern European vehicle, consider Mobil 1™ Formula M or Mobil Super™ Synthetic Euro.

    • Compare these two oils below.
    • They can be used in either gasoline- or diesel-powered engines.
    • If your diesel-powered engine requires an oil meeting CK-4 specifications, then choose between Mobil 1™ Turbo Diesel Truck or Mobil Delvac 1™ ESP.
    • Note: We don’t compare diesel engine oils with motor oils formulated for gasoline-powered vehicles.

    What do the numbers in 5W-40 mean? The numbers refer to the weight and thickness, or viscosity, of the oil. Motor oil gets thicker when it’s cold and thinner when it heats up. The first number indicates the viscosity of the oil at a cold temperature, and the second number indicates the viscosity at operating temperatures.
    View full answer

    What happens if you put 5w30 instead of 5w40?

    Nothing.5w40 might be slightly better in very very hot conditions, but otherwise, the 5w30 is probably better overall. And in reality, they are practically interchangeable.
    View full answer

    What vehicles use 5w20 oil?

    Applications –

    • Mobil 1™ 5W-20 is recommended by ExxonMobil for all types of modern gasoline-powered vehicles, including high-performance turbocharged, supercharged, multi-valve fuel injected engines found in passenger cars, SUVs, light vans and light trucks.
    • • Mobil 1 5W-20 is a high-performance motor oil for all types of cars where this viscosity is recommended.
    • • Mobil 1 5W-20 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
    • Always check your owner’s manual for the manufacturer’s recommended oil viscosity grade, API service classification and any builder approval.

    *Potential fuel economy improvement obtained by switching from higher-viscosity oils to a lower-viscosity grade. Actual savings are dependent upon vehicle/engine type, outside temperature, driving conditions, and your current engine oil viscosity. **Protects for up to 10,000 miles or 1 year, whichever comes first.
    View full answer

    How long does 5W-20 oil last?

    A 5W-20 can be mineral, semi-synthetic, or full synthetic. Each type will have a different useful life. In ‘normal service’ a mineral should be good for around 5000 miles or 8000 km. A semi-synthetic should give you around 7500 miles or 12K km.
    View full answer

    What happens if you put 5w20 and 5w30?

    To Finish Up – What Oil Does A Kia Picanto Take The decreased viscosity will significantly damage your vehicle if you use 5W20 oil in an engine rated for 5W30. Several problems can arise using incorrect thickness, including reduced fuel economy and oil leaks. Your engine might benefit from using a motor oil with a higher viscosity after being in service for 150,000 miles or more.
    View full answer

    What car is 5W-30 oil for?

    What Is 5W-30 Oil Good For? – 5W-30 oil is primarily a winter viscosity grade motor oil, While it does perform adequately at a higher temperature, its best use is for people who drive in cold temperature regions. Due to its lower viscosity, it’s typically recommended for petrol vehicles or a light-duty diesel engine.

    For light-duty use in passenger cars and light trucks For engines that are not under too much pressureFor people who drive under a lot of fluctuating temperatures, since it is less vulnerable to thermal breakdownSome people may switch to this oil during winters since it provides excellent engine protection and helps with engine deposits at colder temperatures

    Now that we know what 5W-30 oil is for, let’s look at some of the most frequently asked questions about this motor oil.
    View full answer

    What engines use 5w30 oil?

    What is 5w30 oil? – 5w30 is a motor oil that is widely used in light-duty petrol and diesel engines. Like most motor oils produced today, 5w30 is a multi-grade oil, meaning it ranges from a lower viscosity grade of 5 to a higher viscosity grade of 30.
    View full answer

    How long does 5W-30 oil last?

    Health and Safety – Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ Yes. High mileage engines – those with more than 75,000 miles – face a number of potential problems that high mileage oil is specifically formulated to address. Some, such as Mobil 1™ Extended Performance High Mileage, Mobil 1™ High Mileage and Mobil Super™ High Mileage, contain engine oil additives and conditioners that help to combat leaks, sludge and general wear and tear. The Mobil 1 lineup of high mileage oils, in addition to providing unsurpassed wear protection, is formulated with a higher base oil viscosity to help reduce leaks and provide better high temperature protection. High mileage oil helps extend engine life through these additives and conditioners, which make using a high mileage oil an important investment in your vehicle. Wear protection starts with reducing metal‐to‐metal contact. According to the industry‐accepted Sequence IVA engine wear test, the Mobil 1™ family of motor oils offers unsurpassed wear protection. and are part of our line of advanced full synthetic motor oils using the latest in additive and base oil technologies. In addition, Mobil 1 Extended Performance High Mileage oils are the only high mileage motor oils that guarantee 20,000 miles of protection. and motor oils are designed for high mileage vehicles that have been using conventional motor oils. It’s true that most vehicles with more than 75,000 miles should be in excellent condition if Mobil 1 oils have been used regularly, and would not require some of the Mobil 1 Extended Performance High Mileage and Mobil 1 High Mileage benefits. However, many cars on the road today do not use synthetic oils, so we developed our high mileage oils specifically for these cars that would benefit from switching off conventional oil. \nPlease consult your vehicle manufacturer’s manual for information specific to your vehicle.\n”,”isCvl”:false,”recommendationURL”:”/en/lubricants/what-to-buy/find-the-right-motor-oil/product-recommendations”,”VendorPage”:”ProductSelector_PVL”,”subtitle”:”Tell us a bit more about your vehicle, and we’ll tell you how to best protect it.”,”title”:”Find the right oil and oil filter for your car”,”enableOpenSearch”:false,”openSearchLimit”:100,”titleHeading”:”h1″,”enableTypeahead”:false,”openSearchAriaLabel”:””,”hideRecommendationButton”:false,”providerKey”:”OATS”,”tellUs”:””,”culture”:”en-US”,”autoSuggest”:,”orText”:””}},”fields”:,”searchForm”:,”inputAriaLabel”: },”modals”:,”errorMessages”:,”prepopulatedFields”:,”iconUrls”:,”progressMessage”:,”customizeColors”: }> : Mobil 1™ Extended Performance High Mileage 5W-30
    View full answer

    What happens if I use 5w40 instead of 5w30?

    The differences between 5w30 and 5w40 oils – For 5w30 oil:

    Kinematic viscosity is between 9.3-12.5mm²/s Dynamic viscosity is 2.9mPas.

    For 5w40 oil:

    Kinematic viscosity is between 12.5-16.3mm²/s Dynamic viscosity is 3.5mPas.

    In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.5w40 and 5w30 motor oils have winter viscosity grades of five, meaning they are effective down to temperatures of -30°C, and are more viscous at very low temperatures, compared to, say, 10w40 oils.

    Resultantly, 5w40 oils are likely to be used in higher-performance engines that have higher operating temperatures and loads than the norm – those driven in urban environments, that commonly sit in traffic or driven at particularly high speeds, for example. If your vehicle is not designed to be driven in a high-performance manner, or you drive at a more considered, environmentally friendly pace, 5w30 oils are a good choice.

    These are commonly better for certain engine components such as oil pumps, can clean the engine better, and have longer lifespans due to having a lower temperature range.
    View full answer

    Do I need 5w20 or 5w30?

    5W20 Vs 5W30: Which Oil Is Better? – Neither of the two oils is any better or worse than each other. It all depends on your engine requirements and car type. When choosing the right multigrade engine oil for your car, you should consider two factors:

    The temperature at which you regularly drive your car (whether you drive in colder temperature or hotter climates)Your engine’s recommended oil viscosity grade

    Although some cars do allow some flexibility in engine oil options, most have a recommended viscosity grade. This is because the engines are tuned to run on a certain oil viscosity, and changing that could affect your engine’s performance. Ideally, 5W 30 oil is perfect for people who drive in seasonal or hotter climates.

    It has a better viscosity index than 5W-20 oil and is more versatile in terms of its warmer temperature range. You’ll get better protection with 5W 30 oil in cold as well as hotter climates.5W-20 oil is best for those who live in colder climates with low temperatures. It can be used for light-duty applications, for engines that do not reach very extreme temperatures.5W-20 oil provides excellent start-up performance in colder temperatures.

    Note : Older vehicles may need a high mileage variant of their regular oil (5W-20 or 5W-30). In this case, the high mileage oil better protects the engine at extreme temperatures from friction and engine drag. Keeping this in mind, here’s what you need to know about 5W-20 vs 5W-30 oil.
    View full answer

    Does Kia recommend full synthetic oil?

    Conventional, Synthetic Blend, or Full Synthetic Which Oil Is Best for Your Kia? Every so often, we get confused about which type of engine oil to use for our cars. There are three types of oils – conventional, synthetic blend, and full synthetic. Kia recommends full synthetic oil to get the best performance out of your vehicle.
    View full answer

    Do Kia cars use synthetic oil?

    Notice to Our Loyal Service Customers Regarding Your Kia Warranty And Kia’s New Synthetic Oil Requirement – Kia is now requiring that all vehicles manufactured after April 2021 use full-synthetic oil to continue to be covered under factory warranty. After June of 2022, any vehicle that is still under factory warranty will need to use full-synthetic oil to continue to be covered under factory warranty.
    View full answer

Related Post